※ Be sure to check the Additional info (AGREEMENT, RETURN POLICY, SHIPPING, CAUTION, PAYMENT METHOD)
※ Please note that the battery not included in the complete kit.
※ Product options
  a. Option #1 is Drone complete kit. You can completely finish our STM32 Drone programming from scratch course with this kit. Soldering and assembly required. (NOT AVAILABLE)
  b. Option #2 is Drone complete kit + assembly service. You don't need any assembly or soldering, but you can start drone programming right away. (ONLY THIS OPTION IS AVAILABLE FOR QUALITY CONTROL. THE DRONE KIT WILL BE SHIPPED AFTER FLIGHT TEST TO VERIFY ALL FUNCTIONS ARE OPERATING CORRECTLY. THEREFORE, THERE ARE NO INITIAL DEFECTS WITH THE PRODUCT.)
※ See a detail of M-HIVE "STM32 drone programming from scratch" video course on:
https://www.m-hive.net/stm32-drone-programming-from-scratch
※ M-HIVE "STM32 drone programming from scratch" video course is available for free on:
https://www.youtube.com/playlist?list=PLUaCOzp6U-RpF4lXNf3MblOrfQL2mDgXn
※ All source code are available on:
https://github.com/ChrisWonyeobPark/M-HIVE-STM32_drone_programming_course-MH-FC-FW1.0/tree/main
 
 
☆★ Caution ☆★
1. When the power is turned on, power is supplied to all parts, which increases battery consumption. Therefore, check the battery voltage regularly with a multimeter, etc. and ensure that the battery voltage does not fall below 10V (based on 3 cells).
If low battery alarm is implemented in the chapter 9, you will be able to know the low battery status through the buzzer sound.
2. When the power is turned on, you will hear a beep sound from the motors, which is normal and indicates that the motors are well connected.
3. If the motor does not run for a few minutes after turning on the power, you will hear a warning sound from the motor. In this case, you can power off and on your drone to turn off the warning sound.
In the chapter 6, you will generate PWM. Then you can turn off the warning sound with the transmitter.
4. The radio telemetry modules will be shipped with default settings, but additional settings may be required.
5. Never install the propellers before completing the course as a major accident may occur!!
 
 
Hi there!
 
Thank you for your interest to our "STM32 drone programming from scratch" course.
 
We are now selling the QAV210 COMPLETE DRONE KIT including MH-FC V2.2.
You can simply and easily start our "STM32 drone programming from scratch" tutorial with only this kit.

QAV210 COMPLETE DRONE KIT includes:
 
- MH-FC V2.2 x 1
- ST-LINK/V2 debugger x 1
- USB to UART module x 1
- QAV210 frame kit x 1
- MATEK PDB XT-60 3-4S BEC x 1
- ReadyToSky MT2204 2300KV BLDC motor CW x 2, CCW x 2
- LITTLEBEE BLHeli_s 2-6S 30A ESC x 4
- 5045 3 blades propeller CW x 2, CCW x 2 (green and orange)
- Anti-vibration rubber PCB standoff x4 and ring x 4
- FLYSKY FS-i6/iA6B mode2(left throttle) transmitter x 1, receiver x 1
- ublox M8N GPS module x 1, holder x 1
- HolyBro radio telemetry module 100mW 433MHz x 2
- Propeller guard 5 inch red x 2, green x 2
 
NOT INCLUDED
- INFINITY Lipo battery 3S 1500mAh 30C with XT-60 connector x 1
(Due to the delivery issue, batteries not included in the kit)
 
You can also buy above drone parts by yourself. Check "Drone components list for M-HIVE online course.pdf" file here.
It is highly recommended to purchase the same products on the list.
(Note: If the parts are different, they may not work as course)
 
Also, you can see the product detail of MH-FC V2.2 here.
 
Then, enjoy drone programming and building your own drone with us!